Factory supplied Lithol Rubine 4bn - Disperse Printing Gum – LEADING
Factory supplied Lithol Rubine 4bn - Disperse Printing Gum – LEADING Detail:
SUPER GUM –H85
(Thickening agent for disperse printing)
Super Gum –H85 is a natural thickener especially developed for disperse printing on polyester fabrics.
Specification
Appearance off-white, fine powder
Ionicity anionic
Viscosity 70000-80000 mpa.s
6%, 35℃, DNJ-1, 4# rotator, 6R/minute
PH value 9-11
Solubility cold water soluble
Moisture 6%
Stock paste preparation 8-10%
Properties
rapid viscosity development
viscosity stability under high shear conditions
very high colour yield
sharp and level printing
excellent wash-off properties, even after HT fixation or thermofixation.
Application
Used for disperse dyes printing on polyester or polyester-based fabrics.
How to use
Preparation of the stock paste(for example, 10%):
Super Gum –H85 10 kg
Water 90 kg
————————————-
Stock paste 100 kg
Method:
-Mix super gum H-85 with cold water as per above dosage.
-High-speed stirring at least 15 minutes and dissolve them completely.
-After a swelling time about 4-6 hours, the stock paste is ready for use.
-To keep swelling time overnight, it will improve rheological property and homogeneity.
Receipt for printing:
Stock paste 500-600
Dyes X
Urea 20
Sodium chlorate 0.5
Ammonium sulphate 5
Deepening agent 10
Add water to 1000
Printing — drying — steaming(128-130℃, 20 minutes) — rinse — soaping — rinse — drying
Packing
In 25kg multiply kraft paper bags, with PE bags inside.
Storage
Keep in cool and dry place, seal bags properly.
Product detail pictures:

Related Product Guide:
Two state executions set for next week | Local News | Direct Bordeaux Fba
Clariant Shows Full Pigment, Dispersion Spectrum At FESPA 2018 – Covering the Printing Inks, Coatings and Allied Industries | Quinacridone Violet
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for Factory supplied Lithol Rubine 4bn - Disperse Printing Gum – LEADING , The product will supply to all over the world, such as: Slovenia, Thailand, Malawi, We confirm to public, cooperation, win-win situation as our principle, adhere to the philosophy of make a living by quality, keep developing by honesty , sincerely hope to build up a good relationship with more and more customers and friends, to achieve a win-win situation and common prosperity.

The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
